OP400 Quad Operational Amplifier, Low-Offset, Low-Power				OP400 Information - Product Datasheet - Product Flow - Back to Amplifiers

Features

• RAD-PAK® technology-hardened against natural space radiation
• Total dose hardness:
  • > 100 krad (Si), depending upon space mission
• Package:
  • 16 pin Rad-Pak® flat package
• Low input offset voltage 150µV max
• Low offset voltage drift
• +1.2µV/°C max (over -55 to +125°C)
• Low supply current (per amplifier) 725 µA max
• High open-loop gain 5000V/mV min
• Input bias current 3 nA Max
• Low noise voltage density 11 nV per (Hz)½ at 1 kHz
• Stable with large capacitive loads 10 nF type
  

Description

Maxwell Technologies’ OP400 monolithic quad operational amplifier microcircuit features a greater than 100 krad (Si) typical total dose tolerance, depending upon space mission. Using Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP400 has an extremely low input offset voltage no less than 150 mV with a drift of under 1.2 mV/°C, guaranteed over the full military temperature range. The OP400 features low power consumption, drawing less than 725 µA per amplifier.

Maxwell Technologies' patented RAD-PAK packaging technology incorporates radiation shielding in the microcircuit package. It eliminates the need for box shielding while providing the required radiation shielding for a lifetime in orbit or space mission. In a GEO orbit, RAD-PAK provides greater than 100 krad (Si) radiation dose tolerance. This product is available with screening up to Class S.