28C010T 1 Megabit EEPROM				28C010T Information - Product Description - Product Datasheet - Radiation Reports - Product Flow - Back to Memory

Features

• 128k x 8-bit EEPROM
• Rad-Pak® radiation-hardened against natural space radiation
• Total dose hardness:
  • >100 krad (Si)
  • Dependent upon orbit
• Excellent Single Event Effects:
  • No Latchup > 120 MeV/mg/cm²
  • SEU > 90 MeV/mg/cm² read mode
• Package:
  • 32-pin Rad-Pak® DUAL IN-LINE (DIP) package
  • 32-pin RAD-PAK® flat pack/DIP package
  • 32-pin Rad-Tolerant flat package
  • JEDEC-approved byte-wide pinout
• High speed:
  • 120, 150, and 200 ns maximum access times available
• High endurance:
  • 10,000 erase/write (Page Mode), 10-year data retention
• Page write mode:
  • 1 to 128 bytes
• Low power dissipation
  • 20 mW/MHz active (typical)
  • 110 µW standby (maximum)
• Standard JEDEC package width

Description

Maxwell Technologies’ 28C010T high-density 1 Megabit (128K x 8-Bit) EEPROM microcircuit features a greater than 100 krad (Si) total dose tolerance. The 28C010T is capable of in-system electrical byte and page programmability. It has a 128-byte page programming function to make its erase and write operations faster. It also features data polling and a Ready/Busy signal to indicate the completion of erase and programming operations. In the 28C010T, hardware data protection is provided with the RES pin, in addition to noise protection on the WE signal and write inhibit on power on and off. Software data protection is implemented using the JEDEC optional standard algorithm.

Maxwell Technologies' patented RAD-PAK® packaging technology incorporates radiation shielding in the microcircuit package. It eliminates the need for box shielding while providing the required radiation shielding for a lifetime in orbit or space mission. In a GEO orbit, RAD-PAK® provides greater than 100 krad (Si) radiation dose tolerance. This product is available with screening up to Class S.