| Package(s) : |
|---|
| 20-Pin RAD-PAK® Flat Package |
| Type |
| Octal Buffer/Driver |
| Resolution |
| 8 Bit |
| Voltage |
| 3.3V |
| Radiation Performance: |
|---|
| RAD-PAK® radiation-hardened against natural space radiation |
| Specifications At A Glance |
| 3.3V ABT octal buffers/drivers with 3-state outputs |
| Operating temperature range: |
|
| Supports mixed-mode signal operation |
| 5V Input and Output Voltages with 3.3V VCC |
| Supports unregulated battery operation down to 2.7V |
| Typical VOLP (output ground bounce) < 0.8V at VCC=3.3V, TA=25°C |
| Supports live insertion |
| Bus-hold data inputs eliminate the need for external pullup resistors |
Maxwell Technologies’ 54LVTH244A octal buffers/drivers micro-circuit is housed in a Rad-Pak® package. The 54LVTH244A is designed specifically for low voltage (3.3V) VCC operation, but with the capability to provide a TTL interface to a 5V system environment.
The 54LVTH244A is organized as two 4-bit drivers with separate output enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high impedance state. The 54LVTH244A active bus hold circuitry is provided to prevent floating data inputs at a valid logic level and to eliminate the need for pullup resistors.
About RAD-PAK® Technology
Maxwell Technologies' patented RAD-PAK® packaging technology incorporates radiation shielding in the microcircuit package. It eliminates the need for box shielding while providing the required radiation shielding for a lifetime in orbit or space mission. In a GEO orbit, RAD-PAK provides greater than 100 krad (Si) radiation dose tolerance. This product is available with screening up to Class S.
