Amplifiers & Comparators


Maxwell offers a range of Operational Amplifiers (Op-Amps) and a Comparator which include Maxwell’s proprietary RAD-PAK® shielding. RAD-PAK® is a hermetic ceramic package shielding technology that reduces the Total Ionizing Dose (TID) received by the semiconductor components in the package by orders of magnitude from the total ionizing dose environment exterior to the package. This allows us to put commercial semiconductors with only moderate total dose tolerance in the high total dose environments encountered in space.

Part #
Number
Feature
Supply Voltage
Output Voltage
Temperature Range
1
Comparator, Low Power, differential input, TTL output
5 to 10V or ±5V 
Rail to Rail
-55°C to +125°C
4
Op-Amp, Rail-to-Rail common-mode range. Low input current
3V to15.5V
Rail to Rail
-55°C to +125°C
1
Op-Amp, Low noise, High Slew Rate, Single-Supply, High BW, Vos = ±375uA
3V to 36V or ± 1.5 to 18V
Rail to Rail
-40°C to +125°C
4
Op-Amp, Low input offset and drift, Low Power
0V-20V
±12V
-55°C to +125°C
4
Op-Amp, input offset and drift, Low Power
±18V (Maximum)
Single for all 4
-55°C to 125°C

Related Products

  • High Speed Comparator -  903

    High Speed Comparator - 903

    Maxwell Technologies’ 903 high-speed, low power voltage comparator features differential analog inputs and TTL logic outputs with active internal pull-ups. The 903 can be powered from separate analog and digital power supplies or from a single combined supply voltage. The analog input common-mode range includes the negative rail, allowing ground sensing when powered from a single supply. When powered from +5V, the 903 consumes 18mW. The 903 is equipped with a TTL compatible latch input. The comparator outpu

    View Product
  • CMOS Quad Rail-to-Rail I/O Op Amp - 6484

    CMOS Quad Rail-to-Rail I/O Op Amp - 6484

    Maxwell Technologies’ 6484 provides a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR< makes it unique among rail-to-rail input amplifiers. It is ideal for systems, such as data acquisition, that require a large input signal range. Maximum dynamic signal range is assured in low voltage and single supply systems by the 6484’s rail-to-rail output swing. The device’s rail-to-rail output swing is guaranteed for loads d

    View Product
  • Dual Operational Amplifier - 284B

    Dual Operational Amplifier - 284B

    Maxwell Technologies’ OP284B is a dual single-supply, 4 MHz bandwidth amplifier featuring rail-to-rail inputs and outputs. Using Maxwell Technologies’ radiation-hardened RADPAK® technology, it is guaranteed to operate from +3 to +36 (or ±1.5 to ±18) volts and will function with a single supply as low as +1.5 volts.

    View Product
  • Quad Low-Offset, Low-Power Operational Amplifier - OP400A

    Quad Low-Offset, Low-Power Operational Amplifier - OP400A

    Maxwell Technologies’ OP400A monolithic quad operational amplifier microcircuit features a greater than 100 krad (Si) typical total dose tolerance, depending upon space mission. Using Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP400A has an extremely low input offset voltage no less than 150 mV with a drift of under 1.2 mV/°C, guaranteed over the full military temperature range. The OP400A features low power consumption, drawing less than 725 µA per amplifier.

    View Product
  • Quad Low Voltage Micropower Operational Amplifier - OP490

    Quad Low Voltage Micropower Operational Amplifier - OP490

    Maxwell Technologies’ OP490 monolithic quad operational amplifier microcircuit features a greater than 100 krad (Si) typical total dose tolerance, depending upon space mission. Using Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP490 has an extremely low input offset voltage no less than 0.2 mV, guaranteed over the full military temperature range. The OP490 features low power consumption, drawing less than 20 µA per amplifier

    View Product